Ice Maker Repair in Cumming, GA
- 90-Day Warranty
- Serving Since 2024
- Same-Day Service
Mon–Fri 8am–6pm · Sat, Sun Closed (EDT)
Service call is FREE with any repair$0 diagnostic when we do the work.
Appliances we repair
Experienced technicians serving Alpharetta, GA and nearby areas.
Brands We Service:
Brands serviced: Sub-Zero, Wolf, GE Profile, Whirlpool, Samsung, LG, Frigidaire, Maytag, KitchenAid, Kenmore, Asko, GE, Electrolux, Speed Queen, Jenn-Air, Amana, Champion, Viking, Thermador, Bosch, Miele, Gaggenau, Dacor, Cove.
How it works
Three steps from your call to a working appliance.
- 1
Book your appointment
Call or book online and pick an arrival window. Same-day slots are often available.
- 2
Professional diagnosis
A technician arrives, finds the fault and quotes the repair up front. The diagnostic fee is waived when you approve the work.
- 3
Repaired, usually same visit
Most repairs finish on the first visit with parts from the van, backed by a 90-day warranty.
A.M.S. Appliance Repair offers expert ice maker repair services in Cumming, GA. If your ice maker is not producing ice, is leaking water, or is making unusual noises, our trained technicians can help. We service Whirlpool, Frigidaire, Kenmore, GE, and GE Profile ice makers, among others. For your convenience, the service call is free when you approve the repair.
Updated
Our trucks & technicians
Types we service
Coverage across every common variation of this appliance category.
- Freestanding
- Built-in
- Under-counter
- Drawer
- Commercial
- Residential
Common Ice Maker Repair in Cumming symptoms
If you're noticing any of these, it's time for a diagnostic.
Ice maker not producing ice
A common symptom is a complete lack of ice production. This can be frustrating, especially when you rely on your ice maker for everyday use. It often indicates an issue with the water supply or internal components.
Leaking water
If you notice water pooling around your ice maker or under the unit, it may have a leak. This could be due to a faulty water line connection, a cracked reservoir, or a malfunctioning fill valve.
Ice is hollow or oddly shaped
Hollow or unusually shaped ice cubes suggest problems with the freezing cycle or water fill. This might be caused by low water pressure, a malfunctioning thermostat, or an issue with the ice mold's fill mechanism.
Machine is noisy
Unusual noises such as grinding, buzzing, or clicking can signal underlying problems. These sounds might point to a failing motor, a blocked water line, or a component that is not properly seated.
Likely causes
What we typically find when we diagnose these symptoms.
Faulty water inlet valve
The water inlet valve controls the flow of water into the ice maker. If it is clogged, frozen, or broken, it can prevent water from entering the machine, leading to no ice production.
Thermostat issues
The thermostat regulates the temperature inside the ice maker. If it malfunctions, it may not signal the unit to freeze or harvest ice correctly, resulting in inconsistent ice production or temperature problems.
Clogged or frozen water line
A blockage or freeze in the water supply line prevents water from reaching the ice maker. This can occur due to sediment buildup, low ambient temperature, or kinks in the line.
Issues with the ice mold or ejector
The ice mold is where the water freezes, and the ejector arm removes the ice. If the mold is damaged or the ejector mechanism fails, it can lead to oddly shaped ice or ice getting stuck.
Filter problems
A clogged water filter can restrict water flow to the ice maker, similar to a clogged line. Over time, filters become saturated and need replacement to maintain optimal performance and water quality.
Quick checks before you call
Safe checks that may save you a service call. Never open the appliance — visual + power checks only.
- 1
Check the power supply
Ensure the ice maker is plugged into a working electrical outlet. Verify that the outlet is receiving power by testing it with another small appliance. Check if the ice maker's power switch is in the 'on' position.
- 2
Inspect the water supply valve
Locate the shut-off valve for the water line supplying your ice maker. Make sure it is fully open. If it is partially closed, water flow may be restricted, affecting ice production.
- 3
Verify the freezer temperature
Confirm that your freezer is set to a sufficiently cold temperature, typically 0°F (-18°C). If the freezer is not cold enough, the ice maker may not be able to freeze water properly.
- 4
Check for obvious obstructions
Visually inspect the ice maker for any visible obstructions, such as ice jams or foreign objects, that might be preventing its normal operation. Clear any minor blockages carefully.
- 5
Examine the ice maker shut-off arm or sensor
Ensure the ice maker's feeler arm is in the down position, or that the optical sensor is not obstructed. If the arm is up or the sensor is blocked, it signals the machine to stop making ice.
Pricing
What affects your final bill.
Diagnostic
The service call is free when you approve the repair.
The final repair cost depends on the specific issue diagnosed and the parts needed. You will receive a detailed quote outlining the total price before any work commences.
Ice Maker Repair in Cumming
Cumming residents and businesses count on A.M.S. Appliance Repair for fast, reliable ice maker repair. Whether you have an emergency breakdown or need routine maintenance, our technicians are dispatched from nearby and arrive with the right parts to fix most appliances on the first visit. We serve the entire Cumming area including surrounding neighborhoods and zip codes.
ZIP Codes We Serve in Cumming
Our technicians cover the following ZIP codes in Cumming, GA. Don't see yours? Call or book — we may still serve you.
Brands We Service in Cumming
Why A.M.S. Appliance Repair?
What Alpharetta, GA says about us
5.0based on 5 Google reviews
Minh Huain the last week
The team was very responsive and friendly. They did a thorough job fixing my Scotsman ice machine. Their pricing is very competitive. I would go back to them again.
Alison MKa week ago
Alex came the same afternoon and had my oven repaired in short order. I highly recommend his services.
Cassandra Connorsa week ago
I needed my disposal repaired. Ivan came out the same day and fixed without having to replace. It was quick and easy and saved me $300. Thank you! Great service.
Hours of Operation(all times EDT)
Nearby Cities
Common Problems We Fix
Serving Alpharetta, GA and nearby
Request service from A.M.S. Appliance Repair
Tell us what's wrong and pick a time — we'll confirm your appointment fast.
Service call from $87 — waived when you proceed with the repair
Frequently Asked Questions
How does the service call fee work?
The service call is free when you approve the repair. This means we will diagnose the issue and provide a quote, and if you decide to proceed with the repair, the initial visit is complimentary. You only pay for the approved repair work itself.
Do you service all of Cumming and nearby areas?
Yes, we provide ice maker repair services throughout Cumming. We also extend our services to nearby cities including Atlanta and Alpharetta, ensuring a broad reach for residents needing appliance assistance.
What happens when a technician arrives?
Upon arrival, our technician will thoroughly inspect your ice maker to pinpoint the exact problem. They will then explain the diagnosis and provide a clear, upfront quote for the necessary repairs before any work begins.
Do you carry parts on the service van?
Our technicians carry a comprehensive selection of common parts on their vans to address many issues on the first visit. For less common parts, we can arrange for prompt ordering and a follow-up appointment.
How quickly can you come to Cumming?
We offer same-day service for ice maker repairs in Cumming. Our goal is to respond promptly to your service request, minimizing the time you are without a functioning ice maker.
Need Alpharetta, GA appliance repair?
Book online in under a minute, or call now.