A.M.S. Appliance Repair
Free Service Call With Repair

Ice Maker Repair in Canton, GA

  • 90-Day Warranty
  • Serving Since 2024
  • Same-Day Service

Mon–Fri 8am–6pm · Sat, Sun Closed (EDT)

Service call is FREE with any repair$0 diagnostic when we do the work.

5.0
5 Google reviews
2024Serving Since
90-dayWarranty
SameDay Service

Brands We Service:

Sub-Zero
Wolf
GE Profile
Whirlpool
Samsung
LG
Frigidaire
Maytag
KitchenAid
Kenmore
Asko
GE
Electrolux
Speed Queen
Jenn-Air
Amana
Champion
Viking
Thermador
Bosch
Miele
Gaggenau
Dacor
Cove

Brands serviced: Sub-Zero, Wolf, GE Profile, Whirlpool, Samsung, LG, Frigidaire, Maytag, KitchenAid, Kenmore, Asko, GE, Electrolux, Speed Queen, Jenn-Air, Amana, Champion, Viking, Thermador, Bosch, Miele, Gaggenau, Dacor, Cove.

Simple process

How it works

Three steps from your call to a working appliance.

  1. 1

    Book your appointment

    Call or book online and pick an arrival window. Same-day slots are often available.

  2. 2

    Professional diagnosis

    A technician arrives, finds the fault and quotes the repair up front. The diagnostic fee is waived when you approve the work.

  3. 3

    Repaired, usually same visit

    Most repairs finish on the first visit with parts from the van, backed by a 90-day warranty.

A.M.S. Appliance Repair provides expert ice maker repair services in Canton, GA. When your ice maker stops producing cubes, fills slowly, or leaks water, our experienced technicians can help. We service popular brands like Whirlpool, Frigidaire, Kenmore, GE, and GE Profile. The service call is free when you approve the repair, ensuring you know the cost upfront before any work begins.

Updated

  • Shop photo
  • Shop photo
  • Shop photo
  • Shop photo
  • Shop photo
  • Shop photo
  • Shop photo
  • Shop photo

Types we service

Coverage across every common variation of this appliance category.

  • Under-counter ice makers
  • Built-in ice makers
  • Commercial ice makers
  • Residential ice makers
  • Countertop ice makers
  • Freestanding ice makers
  • Counter-depth ice makers

Common Ice Maker Repair in Canton symptoms

If you're noticing any of these, it's time for a diagnostic.

  • Ice maker not producing ice

    The most common issue is a complete lack of ice production. This can happen suddenly, leaving you without ice for beverages or coolers. It’s often a sign of a problem with water supply or a component failure within the unit.

  • Slow ice production

    If your ice maker is producing ice, but at a significantly slower rate than usual, it could indicate a partial blockage or a less efficient component. This can be frustrating when you need a steady supply of ice.

  • Ice maker leaks water

    Leaking water around the ice maker or the appliance itself is a clear sign of a problem. This could be a cracked water line, a faulty valve, or a seal that has deteriorated, leading to water damage if not addressed.

  • Ice cubes are hollow or misshapen

    Irregularly shaped or hollow ice cubes often point to issues with water flow or freezing temperature regulation. The ice maker may not be filling properly with water, or the freezing cycle might be interrupted.

Likely causes

What we typically find when we diagnose these symptoms.

  • Clogged water line or filter

    Mineral deposits and sediment can accumulate in the water line or filter, restricting or completely blocking the flow of water to the ice maker. This is a common cause for no ice production or slow production.

  • Faulty water inlet valve

    The water inlet valve controls the flow of water into the ice maker. If this valve fails, it may not open to allow water in, or it could leak, causing water to escape and pool around the appliance.

  • Issues with the ice maker module

    The internal module or mold arm of the ice maker can malfunction. This could prevent the mold from filling, the ejector arm from releasing ice, or the entire freezing cycle from initiating correctly.

  • Frozen or blocked fill tube

    In some cases, the fill tube that delivers water to the ice maker can freeze over, especially in colder environments or if the freezer temperature is set too low. This obstruction prevents water from reaching the mold.

  • Thermostat or temperature sensor problems

    The ice maker relies on specific temperature sensors to regulate its freezing cycle. If these sensors are faulty or inaccurate, the ice maker may not freeze properly or may shut off prematurely, affecting ice quality and quantity.

Quick checks before you call

Safe checks that may save you a service call. Never open the appliance — visual + power checks only.

  1. 1

    Check the ice maker shut-off arm

    Ensure the wire shut-off arm is in the down position, which signals the ice maker to fill. If it's in the up position, it will prevent ice production. Gently move it down to test.

  2. 2

    Verify the water supply valve

    Confirm that the water supply valve connected to the ice maker line is fully open. Sometimes, this valve can be accidentally turned off, cutting off the water supply needed for ice production.

  3. 3

    Inspect the freezer temperature

    Make sure your freezer is set to the correct temperature, typically 0°F (-18°C). If the freezer is not cold enough, the ice maker will not be able to freeze the water properly.

  4. 4

    Check for visible water line kinks

    Visually inspect the water line connecting the appliance to the water supply for any obvious kinks or damage that could restrict water flow. Ensure the line is not crushed or bent sharply.

  5. 5

    Listen for the water valve engaging

    When the ice maker cycle should be starting, listen for the sound of the water inlet valve opening. A humming or buzzing sound indicates the valve is trying to work, while silence might suggest it's faulty or not receiving power.

Pricing

What affects your final bill.

Diagnostic

The service call is free when you approve the repair

The final cost of your ice maker repair will depend on the specific diagnosis and the parts needed. We provide a detailed quote for your approval before any work commences.

Ice Maker Repair in Canton

Canton residents and businesses count on A.M.S. Appliance Repair for fast, reliable ice maker repair. Whether you have an emergency breakdown or need routine maintenance, our technicians are dispatched from nearby and arrive with the right parts to fix most appliances on the first visit. We serve the entire Canton area including surrounding neighborhoods and zip codes.

ZIP Codes We Serve in Canton

Our technicians cover the following ZIP codes in Canton, GA. Don't see yours? Call or book — we may still serve you.

3011430115

Brands We Service in Canton

Sub-Zero
GE Profile
Whirlpool
Frigidaire
Kenmore
GE
Champion

Why A.M.S. Appliance Repair?

Serving Canton and nearby areas
Same-day appointments available
Licensed & Insured technicians
transparent service-call pricing (applied to repair)
Genuine OEM parts used
Customer reviews

What Alpharetta, GA says about us

5.0based on 5 Google reviews

  • Minh Huain the last week

    The team was very responsive and friendly. They did a thorough job fixing my Scotsman ice machine. Their pricing is very competitive. I would go back to them again.

  • Alison MKa week ago

    Alex came the same afternoon and had my oven repaired in short order. I highly recommend his services.

  • Cassandra Connorsa week ago

    I needed my disposal repaired. Ivan came out the same day and fixed without having to replace. It was quick and easy and saved me $300. Thank you! Great service.

Hours of Operation(all times EDT)

Mon8am–6pm EDT
Tue8am–6pm EDT
Wed8am–6pm EDT
Thu8am–6pm EDT
Fri8am–6pm EDT
SatClosed
SunClosed
Same-Business-Day Response Available — call before noon for priority scheduling in your service area.

Common Problems We Fix

Areas we serve

Serving Alpharetta, GA and nearby

Request service from A.M.S. Appliance Repair

Tell us what's wrong and pick a time — we'll confirm your appointment fast.

Service call from $87 — waived when you proceed with the repair

Frequently Asked Questions

How does your service call fee work?

The service call is free when you approve the repair. If you decide not to proceed with the repair after the diagnosis, you will be informed of the diagnostic fee before we start any work.

Do you service all of Canton and surrounding areas?

Yes, A.M.S. Appliance Repair serves Canton and extends our services to nearby cities such as Atlanta and Cumming. We are committed to reaching our customers efficiently across these areas.

Why isn't my ice maker making ice?

This is often due to a clogged water line or a faulty water inlet valve. Mineral buildup can restrict water flow, preventing the ice maker from filling. Sometimes, the ice maker module itself may fail, stopping the cycle.

Is repairing my ice maker usually worth it?

In most cases, repairing an ice maker is more cost-effective than replacing the entire unit. Our technicians can diagnose the issue and provide a quote, allowing you to make an informed decision based on the repair's cost versus a new appliance.

How soon can you come to Canton?

A.M.S. Appliance Repair offers same-day service in Canton. We strive to dispatch a technician as quickly as possible to address your ice maker issues promptly, often on the same day you call.

Need Alpharetta, GA appliance repair?

Book online in under a minute, or call now.